Skip to content

CLI Guide

bpfman offers several CLI commands to interact with the bpfman daemon. The CLI allows you to load, unload, get and list eBPF programs.

Notes For This Guide

As described in other sections, bpfman can be run as either a privileged process or a systemd service. If run as a privileged process, bpfman will most likely be run from your local development branch and will require sudo. Example:

sudo ./target/debug/bpfman list

If run as a systemd service, bpfman will most likely be installed in your $PATH, and will also require sudo. Example:

sudo bpfman list

The examples here use sudo bpfman in place of sudo ./target/debug/bpfman for readability, use as your system is deployed.

eBPF object files used in the examples are taken from the examples and integration-test directories from the bpfman repository.

Basic Syntax

Below are the commands supported by bpfman.

An eBPF manager focusing on simplifying the deployment and administration of eBPF programs.

Usage: bpfman <COMMAND>

Commands:
  load    Load an eBPF program on the system
  unload  Unload an eBPF program using the Program Id
  list    List all eBPF programs loaded via bpfman
  get     Get an eBPF program using the Program Id
  image   eBPF Bytecode Image related commands
  help    Print this message or the help of the given subcommand(s)

Options:
  -h, --help
          Print help (see a summary with '-h')

bpfman load

The bpfman load file and bpfman load image commands are used to load eBPF programs. The bpfman load file command is used to load a locally built eBPF program. The bpfman load image command is used to load an eBPF program packaged in a OCI container image from a given registry. Each program type (i.e. <COMMAND>) has it's own set of attributes specific to the program type, and those attributes MUST come after the program type is entered. There are a common set of attributes, and those MUST come before the program type is entered.

sudo bpfman load file --help
Load an eBPF program from a local .o file

Usage: bpfman load file [OPTIONS] --path <PATH> --name <NAME> <COMMAND>

Commands:
  xdp         Install an eBPF program on the XDP hook point for a given interface
  tc          Install an eBPF program on the TC hook point for a given interface
  tracepoint  Install an eBPF program on a Tracepoint
  kprobe      Install a kprobe or kretprobe eBPF probe
  uprobe      Install a uprobe or uretprobe eBPF probe
  fentry      Install a fentry eBPF probe
  fexit       Install a fexit eBPF probe
  help        Print this message or the help of the given subcommand(s)

Options:
  -p, --path <PATH>
          Required: Location of local bytecode file
          Example: --path /run/bpfman/examples/go-xdp-counter/bpf_x86_bpfel.o

  -n, --name <NAME>
          Required: The name of the function that is the entry point for the BPF program

  -g, --global <GLOBAL>...
          Optional: Global variables to be set when program is loaded.
          Format: <NAME>=<Hex Value>

          This is a very low level primitive. The caller is responsible for formatting
          the byte string appropriately considering such things as size, endianness,
          alignment and packing of data structures.

  -m, --metadata <METADATA>
          Optional: Specify Key/Value metadata to be attached to a program when it
          is loaded by bpfman.
          Format: <KEY>=<VALUE>

          This can later be used to `list` a certain subset of programs which contain
          the specified metadata.
          Example: --metadata owner=acme

      --map-owner-id <MAP_OWNER_ID>
          Optional: Program Id of loaded eBPF program this eBPF program will share a map with.
          Only used when multiple eBPF programs need to share a map.
          Example: --map-owner-id 63178

  -h, --help
          Print help (see a summary with '-h')

and

sudo bpfman load image --help
Load an eBPF program packaged in a OCI container image from a given registry

Usage: bpfman load image [OPTIONS] --image-url <IMAGE_URL> --name <NAME> <COMMAND>

Commands:
  xdp         Install an eBPF program on the XDP hook point for a given interface
  tc          Install an eBPF program on the TC hook point for a given interface
  tracepoint  Install an eBPF program on a Tracepoint
  kprobe      Install a kprobe or kretprobe eBPF probe
  uprobe      Install a uprobe or uretprobe eBPF probe
  fentry      Install a fentry eBPF probe
  fexit       Install a fexit eBPF probe
  help        Print this message or the help of the given subcommand(s)

Options:
  -i, --image-url <IMAGE_URL>
          Required: Container Image URL.
          Example: --image-url quay.io/bpfman-bytecode/xdp_pass:latest

  -r, --registry-auth <REGISTRY_AUTH>
          Optional: Registry auth for authenticating with the specified image registry.
          This should be base64 encoded from the '<username>:<password>' string just like
          it's stored in the docker/podman host config.
          Example: --registry_auth "YnjrcKw63PhDcQodiU9hYxQ2"

  -p, --pull-policy <PULL_POLICY>
          Optional: Pull policy for remote images.

          [possible values: Always, IfNotPresent, Never]

          [default: IfNotPresent]

  -n, --name <NAME>
          Required: The name of the function that is the entry point for the eBPF program.

  -g, --global <GLOBAL>...
          Optional: Global variables to be set when program is loaded.
          Format: <NAME>=<Hex Value>

          This is a very low level primitive. The caller is responsible for formatting
          the byte string appropriately considering such things as size, endianness,
          alignment and packing of data structures.

  -m, --metadata <METADATA>
          Optional: Specify Key/Value metadata to be attached to a program when it
          is loaded by bpfman.
          Format: <KEY>=<VALUE>

          This can later be used to list a certain subset of programs which contain
          the specified metadata.
          Example: --metadata owner=acme

      --map-owner-id <MAP_OWNER_ID>
          Optional: Program Id of loaded eBPF program this eBPF program will share a map with.
          Only used when multiple eBPF programs need to share a map.
          Example: --map-owner-id 63178

  -h, --help
          Print help (see a summary with '-h')

When using either load command, --path, --image-url, --registry-auth, --pull-policy, --name, --global, --metadata and --map-owner-id must be entered before the <COMMAND> (xdp, tc, tracepoint, etc) is entered. Then each <COMMAND> has its own custom parameters (same for both bpfman load file and bpfman load image):

sudo bpfman load file xdp --help
Install an eBPF program on the XDP hook point for a given interface

Usage: bpfman load file --path <PATH> --name <NAME> xdp [OPTIONS] --iface <IFACE> --priority <PRIORITY>

Options:
  -i, --iface <IFACE>
          Required: Interface to load program on

  -p, --priority <PRIORITY>
          Required: Priority to run program in chain. Lower value runs first

      --proceed-on <PROCEED_ON>...
          Optional: Proceed to call other programs in chain on this exit code.
          Multiple values supported by repeating the parameter.
          Example: --proceed-on "pass" --proceed-on "drop"

          [possible values: aborted, drop, pass, tx, redirect, dispatcher_return]

          [default: pass, dispatcher_return]

  -h, --help
          Print help (see a summary with '-h')

Example loading from local file (--path is the fully qualified path):

cd bpfman/
sudo bpfman load file --path tests/integration-test/bpf/.output/xdp_pass.bpf.o --name "pass" xdp --iface eno3 --priority 100

Example from image in remote repository:

sudo bpfman load image --image-url quay.io/bpfman-bytecode/xdp_pass:latest --name "pass" xdp --iface eno3 --priority 100

The tc command is similar to xdp, but it also requires the direction option and the proceed-on values are different.

sudo bpfman load file tc --help
Install an eBPF program on the TC hook point for a given interface

Usage: bpfman load file --path <PATH> --name <NAME> tc [OPTIONS] --direction <DIRECTION> --iface <IFACE> --priority <PRIORITY>

Options:
  -d, --direction <DIRECTION>
          Required: Direction to apply program.

          [possible values: ingress, egress]

  -i, --iface <IFACE>
          Required: Interface to load program on

  -p, --priority <PRIORITY>
          Required: Priority to run program in chain. Lower value runs first

      --proceed-on <PROCEED_ON>...
          Optional: Proceed to call other programs in chain on this exit code.
          Multiple values supported by repeating the parameter.
          Example: --proceed-on "ok" --proceed-on "pipe"

          [possible values: unspec, ok, reclassify, shot, pipe, stolen, queued,
                            repeat, redirect, trap, dispatcher_return]

          [default: ok, pipe, dispatcher_return]

  -h, --help
          Print help (see a summary with '-h')

The following is an example of the tc command using short option names:

cd bpfman/
sudo bpfman load file -p tests/integration-test/bpf/.output/tc_pass.bpf.o -n "pass" tc -d ingress -i mynet1 -p 40

For the tc_pass.bpf.o program loaded with the command above, the name would be set as shown in the following snippet, taken from the function name, not SEC():

SEC("classifier/pass")
int pass(struct __sk_buff *skb) {
{
    :
}

Additional Load Examples

Below are some additional examples of bpfman load commands:

Fentry

sudo bpfman load image --image-url quay.io/bpfman-bytecode/fentry:latest --name "test_fentry" fentry -f do_unlinkat

Fexit

sudo bpfman load image --image-url quay.io/bpfman-bytecode/fexit:latest --name "test_fexit" fexit -f do_unlinkat

Kprobe

sudo bpfman load image --image-url quay.io/bpfman-bytecode/kprobe:latest --name "my_kprobe" kprobe -f try_to_wake_up

Kretprobe

sudo bpfman load image --image-url quay.io/bpfman-bytecode/kretprobe:latest --name "my_kretprobe" kprobe -f try_to_wake_up -r

TC

cd bpfman/
sudo bpfman load file --path examples/go-tc-counter/bpf_x86_bpfel.o --name "stats" tc --direction ingress --iface eno3 --priority 110

Uprobe

sudo bpfman load image --image-url quay.io/bpfman-bytecode/uprobe:latest --name "my_uprobe" uprobe -f "malloc" -t "libc"

Uretprobe

sudo bpfman load image --image-url quay.io/bpfman-bytecode/uretprobe:latest --name "my_uretprobe" uprobe -f "malloc" -t "libc" -r

XDP

cd bpfman/
sudo bpfman load file --path bpfman/examples/go-xdp-counter/bpf_x86_bpfel.o --name "xdp_stats" xdp --iface eno3 --priority 35

Setting Global Variables in eBPF Programs

Global variables can be set for any eBPF program type when loading as follows:

cd bpfman/
sudo bpfman load file -p bpfman/tests/integration-test/bpf/.output/tc_pass.bpf.o -g GLOBAL_u8=01 GLOBAL_u32=0A0B0C0D -n "pass" tc -d ingress -i mynet1 -p 40

Note that when setting global variables, the eBPF program being loaded must have global variables named with the strings given, and the size of the value provided must match the size of the given variable. For example, the above command can be used to update the following global variables in an eBPF program.

volatile const __u32 GLOBAL_u8 = 0;
volatile const __u32 GLOBAL_u32 = 0;

Modifying the Proceed-On Behavior

The proceed-on setting applies to xdp and tc programs. For both of these program types, an ordered list of eBPF programs is maintained per attach point. The proceed-on setting determines whether processing will "proceed" to the next eBPF program in the list, or terminate processing and return, based on the program's return value. For example, the default proceed-on configuration for an xdp program can be modified as follows:

cd bpfman/
sudo bpfman load file -p tests/integration-test/bpf/.output/xdp_pass.bpf.o -n "pass" xdp -i mynet1 -p 30 --proceed-on drop pass dispatcher_return

Sharing Maps Between eBPF Programs

Warning

Currently for the map sharing feature to work the LIBBPF_PIN_BY_NAME flag MUST be set in the shared bpf map definitions. Please see this aya issue for future work that will change this requirement.

To share maps between eBPF programs, first load the eBPF program that owns the maps. One eBPF program must own the maps.

cd bpfman/
sudo bpfman load file --path examples/go-xdp-counter/bpf_x86_bpfel.o -n "xdp_stats" xdp --iface eno3 --priority 100
6371

Next, load additional eBPF programs that will share the existing maps by passing the program id of the eBPF program that owns the maps using the --map-owner-id parameter:

cd bpfman/
sudo bpfman load file --path examples/go-xdp-counter/bpf_x86_bpfel.o -n "xdp_stats" --map-owner-id 6371 xdp --iface eno3 --priority 100
6373

Use the bpfman get <PROGRAM_ID> command to display the configuration:

sudo bpfman list
 Program ID  Name       Type  Load Time
 6371        xdp_stats  xdp   2023-07-18T16:50:46-0400
 6373        xdp_stats  xdp   2023-07-18T16:51:06-0400

sudo bpfman get 6371
 Bpfman State
---------------
 Name:          xdp_stats
 Path:          /home/<$USER>/src/bpfman/examples/go-xdp-counter/bpf_x86_bpfel.o
 Global:        None
 Metadata:      None
 Map Pin Path:  /run/bpfman/fs/maps/6371
 Map Owner ID:  None
 Map Used By:   6371
                6373
 Priority:      100
 Iface:         eno3
 Position:      1
 Proceed On:    pass, dispatcher_return
:

sudo bpfman get 6373
 Bpfman State
---------------
 Name:          xdp_stats
 Path:          /home/<$USER>/src/bpfman/examples/go-xdp-counter/bpf_x86_bpfel.o
 Global:        None
 Metadata:      None
 Map Pin Path:  /run/bpfman/fs/maps/6371
 Map Owner ID:  6371
 Map Used By:   6371
                6373
 Priority:      100
 Iface:         eno3
 Position:      0
 Proceed On:    pass, dispatcher_return
:

As the output shows, the first program (6371) owns the map, with Map Owner ID of None and the Map Pin Path (/run/bpfman/fs/maps/6371) that includes its own ID.

The second program (6373) references the first program via the Map Owner ID set to 6371 and the Map Pin Path (/run/bpfman/fs/maps/6371) set to same directory as the first program, which includes the first program's ID. The output for both commands shows the map is being used by both programs via the Map Used By with values of 6371 and 6373.

The eBPF programs can be unloaded any order, the Map Pin Path will not be deleted until all the programs referencing the maps are unloaded:

sudo bpfman unload 6371
sudo bpfman unload 6373

bpfman list

The bpfman list command lists all the bpfman loaded eBPF programs:

sudo bpfman list
 Program ID  Name              Type        Load Time
 6201        pass              xdp         2023-07-17T17:17:53-0400
 6202        sys_enter_openat  tracepoint  2023-07-17T17:19:09-0400
 6204        stats             tc          2023-07-17T17:20:14-0400

To see all eBPF programs loaded on the system, include the --all option.

sudo bpfman list --all
 Program ID  Name              Type           Load Time
 52          restrict_filesy   lsm            2023-05-03T12:53:34-0400
 166         dump_bpf_map      tracing        2023-05-03T12:53:52-0400
 167         dump_bpf_prog     tracing        2023-05-03T12:53:52-0400
 455                           cgroup_device  2023-05-03T12:58:26-0400
 :
 6194                          cgroup_device  2023-07-17T17:15:23-0400
 6201        pass              xdp            2023-07-17T17:17:53-0400
 6202        sys_enter_openat  tracepoint     2023-07-17T17:19:09-0400
 6203        dispatcher        tc             2023-07-17T17:20:14-0400
 6204        stats             tc             2023-07-17T17:20:14-0400
 6207        xdp               xdp            2023-07-17T17:27:13-0400
 6210        test_fentry       tracing        2023-07-17T17:28:34-0400
 6212        test_fexit        tracing        2023-07-17T17:29:02-0400
 6223        my_uprobe         probe          2023-07-17T17:31:45-0400
 6225        my_kretprobe      probe          2023-07-17T17:32:27-0400
 6928        my_kprobe         probe          2023-07-17T17:33:49-0400

To filter on a given program type, include the --program-type parameter:

sudo bpfman list --all --program-type tc
 Program ID  Name        Type  Load Time
 6203        dispatcher  tc    2023-07-17T17:20:14-0400
 6204        stats       tc    2023-07-17T17:20:14-0400

Note: The list filters by the Kernel Program Type. kprobe, kretprobe, uprobe and uretprobe all map to the probe Kernel Program Type. fentry and fexit both map to the tracing Kernel Program Type.

bpfman get

To retrieve detailed information for a loaded eBPF program, use the bpfman get <PROGRAM_ID> command. If the eBPF program was loaded via bpfman, then there will be a Bpfman State section with bpfman related attributes and a Kernel State section with kernel information. If the eBPF program was loaded outside of bpfman, then the Bpfman State section will be empty and Kernel State section will be populated.

sudo bpfman get 6204
 Bpfman State
---------------
 Name:          stats
 Image URL:     quay.io/bpfman-bytecode/go-tc-counter:latest
 Pull Policy:   IfNotPresent
 Global:        None
 Metadata:      None
 Map Pin Path:  /run/bpfman/fs/maps/6204
 Map Owner ID:  None
 Map Used By:   6204
 Priority:      100
 Iface:         eno3
 Position:      0
 Direction:     eg
 Proceed On:    pipe, dispatcher_return

 Kernel State
----------------------------------
 Program ID:                       6204
 Name:                             stats
 Type:                             tc
 Loaded At:                        2023-07-17T17:20:14-0400
 Tag:                              ead94553702a3742
 GPL Compatible:                   true
 Map IDs:                          [2705]
 BTF ID:                           2821
 Size Translated (bytes):          176
 JITed:                            true
 Size JITed (bytes):               116
 Kernel Allocated Memory (bytes):  4096
 Verified Instruction Count:       24

sudo bpfman get 6190
 Bpfman State
---------------
NONE

 Kernel State
----------------------------------
Program ID:                        6190
Name:                              None
Type:                              cgroup_skb
Loaded At:                         2023-07-17T17:15:23-0400
Tag:                               6deef7357e7b4530
GPL Compatible:                    true
Map IDs:                           []
BTF ID:                            0
Size Translated (bytes):           64
JITed:                             true
Size JITed (bytes):                55
Kernel Allocated Memory (bytes):   4096
Verified Instruction Count:        8

bpfman unload

The bpfman unload command takes the program id from the load or list command as a parameter, and unloads the requested eBPF program:

sudo bpfman unload 6204

sudo bpfman list
 Program ID  Name              Type        Load Time
 6201        pass              xdp         2023-07-17T17:17:53-0400
 6202        sys_enter_openat  tracepoint  2023-07-17T17:19:09-0400

bpfman image

The bpfman image commands contain a set of container image related commands.

bpfman image pull

The bpfman image pull command pulls a given bytecode image for future use by a load command.

sudo bpfman image pull --help
Pull an eBPF bytecode image from a remote registry

Usage: bpfman image pull [OPTIONS] --image-url <IMAGE_URL>

Options:
  -i, --image-url <IMAGE_URL>
          Required: Container Image URL.
          Example: --image-url quay.io/bpfman-bytecode/xdp_pass:latest

  -r, --registry-auth <REGISTRY_AUTH>
          Optional: Registry auth for authenticating with the specified image registry.
          This should be base64 encoded from the '<username>:<password>' string just like
          it's stored in the docker/podman host config.
          Example: --registry_auth "YnjrcKw63PhDcQodiU9hYxQ2"

  -p, --pull-policy <PULL_POLICY>
          Optional: Pull policy for remote images.

          [possible values: Always, IfNotPresent, Never]

          [default: IfNotPresent]

  -h, --help
          Print help (see a summary with '-h')

Example usage:

sudo bpfman image pull --image-url quay.io/bpfman-bytecode/xdp_pass:latest
Successfully downloaded bytecode

Then when loaded, the local image will be used:

sudo bpfman load image --image-url quay.io/bpfman-bytecode/xdp_pass:latest --pull-policy IfNotPresent xdp --iface eno3 --priority 100
 Bpfman State                                           
 ---------------
 Name:          pass                                  
 Image URL:     quay.io/bpfman-bytecode/xdp_pass:latest 
 Pull Policy:   IfNotPresent                          
 Global:        None                                  
 Metadata:      None                                  
 Map Pin Path:  /run/bpfman/fs/maps/406681              
 Map Owner ID:  None                                  
 Maps Used By:  None                                  
 Priority:      100                                   
 Iface:         eno3
 Position:      2                                     
 Proceed On:    pass, dispatcher_return               

 Kernel State                                               
 ----------------------------------
 Program ID:                       406681                   
 Name:                             pass                     
 Type:                             xdp                      
 Loaded At:                        1917-01-27T01:37:06-0500 
 Tag:                              4b9d1b2c140e87ce         
 GPL Compatible:                   true                     
 Map IDs:                          [736646]                 
 BTF ID:                           555560                   
 Size Translated (bytes):          96                       
 JITted:                           true                     
 Size JITted:                      67                       
 Kernel Allocated Memory (bytes):  4096                     
 Verified Instruction Count:       9

bpfman image build

The bpfman image build command is a utility command that builds and pushes an eBPF program in a OCI container image leveraging either docker or podman. The eBPF program bytecode must already be generated. This command calls docker or podman with the proper parameters for building multi-architecture based images with the proper labels for a OCI container image.

Since this command is leveraging docker and podman, a container file (--container-file or -f) is required, along with an image tag (--tag of -t). In addition, the bytecode to package must be included. The bytecode can take several forms, but at least one must be provided:

  • --bytecode or -b: Use this option for a single bytecode object file built for the host architecture. The value of this parameter is a single bytecode object file.
  • --cilium-ebpf-project or -c: Use this option for a cilium/ebpf based project. The value of this parameter is a directory that contains multiple object files for different architectures, where the object files follow the Cilium naming convention with the architecture in the name (i.e. bpf_x86_bpfel.o, bpf_arm64_bpfel.o, bpf_powerpc_bpfel.o, bpf_s390_bpfeb.o).
  • --bc-386-el .. --bc-s390x-eb: Use this option to add one or more architecture specific bytecode files.
bpfman image build --help
Build an eBPF bytecode image from local bytecode objects and push to a registry.

To use, the --container-file and --tag must be included, as well as a pointer to
at least one bytecode file that can be passed in several ways. Use either:

* --bytecode: for a single bytecode built for the host architecture.

* --cilium-ebpf-project: for a cilium/ebpf project directory which contains
    multiple object files for different architectures.

* --bc-386-el .. --bc-s390x-eb: to add one or more architecture specific bytecode files.

Examples:
   bpfman image build -f Containerfile.bytecode -t quay.io/<USER>/go-xdp-counter:test \
     -b ./examples/go-xdp-counter/bpf_x86_bpfel.o

Usage: bpfman image build [OPTIONS] --tag <TAG> --container-file <CONTAINER_FILE> <--bytecode <BYTECODE>|--cilium-ebpf-project <CILIUM_EBPF_PROJECT>|--bc-386-el <BC_386_EL>|--bc-amd64-el <BC_AMD64_EL>|--bc-arm-el <BC_ARM_EL>|--bc-arm64-el <BC_ARM64_EL>|--bc-loong64-el <BC_LOONG64_EL>|--bc-mips-eb <BC_MIPS_EB>|--bc-mipsle-el <BC_MIPSLE_EL>|--bc-mips64-eb <BC_MIPS64_EB>|--bc-mips64le-el <BC_MIPS64LE_EL>|--bc-ppc64-eb <BC_PPC64_EB>|--bc-ppc64le-el <BC_PPC64LE_EL>|--bc-riscv64-el <BC_RISCV64_EL>|--bc-s390x-eb <BC_S390X_EB>>

Options:
  -t, --tag <TAG>
          Required: Name and optionally a tag in the name:tag format.
          Example: --tag quay.io/bpfman-bytecode/xdp_pass:latest

  -f, --container-file <CONTAINER_FILE>
          Required: Dockerfile to use for building the image.
          Example: --container_file Containerfile.bytecode

  -r, --runtime <RUNTIME>
          Optional: Container runtime to use, works with docker or podman, defaults to docker
          Example: --runtime podman

  -b, --bytecode <BYTECODE>
          Optional: bytecode file to use for building the image assuming host architecture.
          Example: -b ./examples/go-xdp-counter/bpf_x86_bpfel.o

  -c, --cilium-ebpf-project <CILIUM_EBPF_PROJECT>
          Optional: If specified pull multi-arch bytecode files from a cilium/ebpf formatted project
          where the bytecode files all contain a standard bpf_<GOARCH>_<(el/eb)>.o tag.
          Example: --cilium-ebpf-project ./examples/go-xdp-counter

      --bc-386-el <BC_386_EL>
          Optional: bytecode file to use for building the image assuming amd64 architecture.
          Example: --bc-386-el ./examples/go-xdp-counter/bpf_386_bpfel.o

      --bc-amd64-el <BC_AMD64_EL>
          Optional: bytecode file to use for building the image assuming amd64 architecture.
          Example: --bc-amd64-el ./examples/go-xdp-counter/bpf_x86_bpfel.o

      --bc-arm-el <BC_ARM_EL>
          Optional: bytecode file to use for building the image assuming arm architecture.
          Example: --bc-arm-el ./examples/go-xdp-counter/bpf_arm_bpfel.o

      --bc-arm64-el <BC_ARM64_EL>
          Optional: bytecode file to use for building the image assuming arm64 architecture.
          Example: --bc-arm64-el ./examples/go-xdp-counter/bpf_arm64_bpfel.o

      --bc-loong64-el <BC_LOONG64_EL>
          Optional: bytecode file to use for building the image assuming loong64 architecture.
          Example: --bc-loong64-el ./examples/go-xdp-counter/bpf_loong64_bpfel.o

      --bc-mips-eb <BC_MIPS_EB>
          Optional: bytecode file to use for building the image assuming mips architecture.
          Example: --bc-mips-eb ./examples/go-xdp-counter/bpf_mips_bpfeb.o

      --bc-mipsle-el <BC_MIPSLE_EL>
          Optional: bytecode file to use for building the image assuming mipsle architecture.
          Example: --bc-mipsle-el ./examples/go-xdp-counter/bpf_mipsle_bpfel.o

      --bc-mips64-eb <BC_MIPS64_EB>
          Optional: bytecode file to use for building the image assuming mips64 architecture.
          Example: --bc-mips64-eb ./examples/go-xdp-counter/bpf_mips64_bpfeb.o

      --bc-mips64le-el <BC_MIPS64LE_EL>
          Optional: bytecode file to use for building the image assuming mips64le architecture.
          Example: --bc-mips64le-el ./examples/go-xdp-counter/bpf_mips64le_bpfel.o

      --bc-ppc64-eb <BC_PPC64_EB>
          Optional: bytecode file to use for building the image assuming ppc64 architecture.
          Example: --bc-ppc64-eb ./examples/go-xdp-counter/bpf_ppc64_bpfeb.o

      --bc-ppc64le-el <BC_PPC64LE_EL>
          Optional: bytecode file to use for building the image assuming ppc64le architecture.
          Example: --bc-ppc64le-el ./examples/go-xdp-counter/bpf_ppc64le_bpfel.o

      --bc-riscv64-el <BC_RISCV64_EL>
          Optional: bytecode file to use for building the image assuming riscv64 architecture.
          Example: --bc-riscv64-el ./examples/go-xdp-counter/bpf_riscv64_bpfel.o

      --bc-s390x-eb <BC_S390X_EB>
          Optional: bytecode file to use for building the image assuming s390x architecture.
          Example: --bc-s390x-eb ./examples/go-xdp-counter/bpf_s390x_bpfeb.o

  -h, --help
          Print help (see a summary with '-h')

Below are some different examples of building images. Note that sudo is not required. This command also pushed the image to a registry, so user must already be logged into the registry.

Example of single bytecode image:

bpfman image build -f Containerfile.bytecode -t quay.io/$QUAY_USER/go-xdp-counter:test -b ./examples/go-xdp-counter/bpf_x86_bpfel.o

Example of directory with Cilium generated bytecode objects:

bpfman image build -f Containerfile.bytecode.multi.arch -t quay.io/$QUAY_USER/go-xdp-counter:test -c ./examples/go-xdp-counter/

Note

To build images for multiple architectures on a local system, docker (or podman) may need additional configuration settings to allow for caching of non-native images. See https://docs.docker.com/build/building/multi-platform/ for more details.

bpfman image generate-build-args

The bpfman image generate-build-args command is a utility command that generates the labels used to package eBPF program bytecode in a OCI container image. The eBPF program bytecode must already be generated.

This command requires the bytecode to package that would be packaged in a OCI container image. The bytecode can take several forms, but at least one must be provided:

  • --bytecode or -b: Use this option for a single bytecode object file built for the host architecture. The value of this parameter is a single bytecode object file.
  • --cilium-ebpf-project or -c: Use this option for a cilium/ebpf based project. The value of this parameter is a directory that contains multiple object files for different architectures, where the object files follow the Cilium naming convention with the architecture in the name (i.e. bpf_x86_bpfel.o, bpf_arm64_bpfel.o, bpf_powerpc_bpfel.o, bpf_s390_bpfeb.o).
  • --bc-386-el .. --bc-s390x-eb: Use this option to add one or more architecture specific bytecode files.
bpfman image generate-build-args --help
Generate the OCI image labels for a given bytecode file.

To use, the --container-file and --tag must be included, as well as a pointer to
at least one bytecode file that can be passed in several ways. Use either:

* --bytecode: for a single bytecode built for the host architecture.

* --cilium-ebpf-project: for a cilium/ebpf project directory which contains
    multiple object files for different architectures.

* --bc-386-el .. --bc-s390x-eb: to add one or more architecture specific bytecode files.

Examples:
  bpfman image generate-build-args --bc-amd64-el ./examples/go-xdp-counter/bpf_x86_bpfel.o

Usage: bpfman image generate-build-args <--bytecode <BYTECODE>|--cilium-ebpf-project <CILIUM_EBPF_PROJECT>|--bc-386-el <BC_386_EL>|--bc-amd64-el <BC_AMD64_EL>|--bc-arm-el <BC_ARM_EL>|--bc-arm64-el <BC_ARM64_EL>|--bc-loong64-el <BC_LOONG64_EL>|--bc-mips-eb <BC_MIPS_EB>|--bc-mipsle-el <BC_MIPSLE_EL>|--bc-mips64-eb <BC_MIPS64_EB>|--bc-mips64le-el <BC_MIPS64LE_EL>|--bc-ppc64-eb <BC_PPC64_EB>|--bc-ppc64le-el <BC_PPC64LE_EL>|--bc-riscv64-el <BC_RISCV64_EL>|--bc-s390x-eb <BC_S390X_EB>>

Options:
  -b, --bytecode <BYTECODE>
          Optional: bytecode file to use for building the image assuming host architecture.
          Example: -b ./examples/go-xdp-counter/bpf_x86_bpfel.o

  -c, --cilium-ebpf-project <CILIUM_EBPF_PROJECT>
          Optional: If specified pull multi-arch bytecode files from a cilium/ebpf formatted project
          where the bytecode files all contain a standard bpf_<GOARCH>_<(el/eb)>.o tag.
          Example: --cilium-ebpf-project ./examples/go-xdp-counter

      --bc-386-el <BC_386_EL>
          Optional: bytecode file to use for building the image assuming amd64 architecture.
          Example: --bc-386-el ./examples/go-xdp-counter/bpf_386_bpfel.o

      --bc-amd64-el <BC_AMD64_EL>
          Optional: bytecode file to use for building the image assuming amd64 architecture.
          Example: --bc-amd64-el ./examples/go-xdp-counter/bpf_x86_bpfel.o

      --bc-arm-el <BC_ARM_EL>
          Optional: bytecode file to use for building the image assuming arm architecture.
          Example: --bc-arm-el ./examples/go-xdp-counter/bpf_arm_bpfel.o

      --bc-arm64-el <BC_ARM64_EL>
          Optional: bytecode file to use for building the image assuming arm64 architecture.
          Example: --bc-arm64-el ./examples/go-xdp-counter/bpf_arm64_bpfel.o

      --bc-loong64-el <BC_LOONG64_EL>
          Optional: bytecode file to use for building the image assuming loong64 architecture.
          Example: --bc-loong64-el ./examples/go-xdp-counter/bpf_loong64_bpfel.o

      --bc-mips-eb <BC_MIPS_EB>
          Optional: bytecode file to use for building the image assuming mips architecture.
          Example: --bc-mips-eb ./examples/go-xdp-counter/bpf_mips_bpfeb.o

      --bc-mipsle-el <BC_MIPSLE_EL>
          Optional: bytecode file to use for building the image assuming mipsle architecture.
          Example: --bc-mipsle-el ./examples/go-xdp-counter/bpf_mipsle_bpfel.o

      --bc-mips64-eb <BC_MIPS64_EB>
          Optional: bytecode file to use for building the image assuming mips64 architecture.
          Example: --bc-mips64-eb ./examples/go-xdp-counter/bpf_mips64_bpfeb.o

      --bc-mips64le-el <BC_MIPS64LE_EL>
          Optional: bytecode file to use for building the image assuming mips64le architecture.
          Example: --bc-mips64le-el ./examples/go-xdp-counter/bpf_mips64le_bpfel.o

      --bc-ppc64-eb <BC_PPC64_EB>
          Optional: bytecode file to use for building the image assuming ppc64 architecture.
          Example: --bc-ppc64-eb ./examples/go-xdp-counter/bpf_ppc64_bpfeb.o

      --bc-ppc64le-el <BC_PPC64LE_EL>
          Optional: bytecode file to use for building the image assuming ppc64le architecture.
          Example: --bc-ppc64le-el ./examples/go-xdp-counter/bpf_ppc64le_bpfel.o

      --bc-riscv64-el <BC_RISCV64_EL>
          Optional: bytecode file to use for building the image assuming riscv64 architecture.
          Example: --bc-riscv64-el ./examples/go-xdp-counter/bpf_riscv64_bpfel.o

      --bc-s390x-eb <BC_S390X_EB>
          Optional: bytecode file to use for building the image assuming s390x architecture.
          Example: --bc-s390x-eb ./examples/go-xdp-counter/bpf_s390x_bpfeb.o

  -h, --help
          Print help (see a summary with '-h')

Below are some different examples of generating build arguments. Note that sudo is not required.

Example of single bytecode image:

$ bpfman image generate-build-args -b ./examples/go-xdp-counter/bpf_x86_bpfel.o
BYTECODE_FILE=./examples/go-xdp-counter/bpf_x86_bpfel.o
PROGRAMS={"xdp_stats":"xdp"}
MAPS={"xdp_stats_map":"per_cpu_array"}

Example of directory with Cilium generated bytecode objects:

$ bpfman image generate-build-args -c ./examples/go-xdp-counter/
BC_AMD64_EL=./examples/go-xdp-counter/bpf_x86_bpfel.o
BC_ARM_EL=./examples/go-xdp-counter/bpf_arm64_bpfel.o
BC_PPC64LE_EL=./examples/go-xdp-counter/bpf_powerpc_bpfel.o
BC_S390X_EB=./examples/go-xdp-counter/bpf_s390_bpfeb.o
PROGRAMS={"xdp_stats":"xdp"}
MAPS={"xdp_stats_map":"per_cpu_array"}